In a Wi-Fi client configuration utility, what feature is most likely to be user configurable?
A. 802.1p to WMM mappings
B. SNMPv3 Users
C. WMM-PS Dozing Interval
D. RADIUS Server IP Address
E. EAP Authentication Type
Answer: E
Thursday, 6 December 2018
Thursday, 12 July 2018
CWNP CWNA-106 Question Answer
When planning an access point deployment that utilizes Power over Ethernet (PoE) switches at the network edge, what design decision could adversely affect the operation of 802.3-2012, Clause 33 APs?
A. All ports on theEthernet switch will be supporting Class 3 PoE powered devices.
B. Some APs are connected to a PoE switch and are also receiving power from an AC outlet.
C. The Ethernet switch uplink ports are not connected to an 802.3-2012, Clause 33-compliant core or distribution Ethernet switch.
D. A gigabit Ethernet switch port supporting an 802.11a/g AP auto-negotiates to 100 Mbps.
Answer: A
You are onsite with a client to perform a post-deployment site survey. When verifying a multiple channel VoWiFi deployment using a VoWiFi handset, which aspect is most important?
A. Performingprotocol analysis with a single wireless adapter that is scanning all channels in use
B. Testing a constant conversation orhandset tone while roaming from area to area, or performing an active survey
C. Configuring DSCP-to-802.11e QoS maps on the handset for each access category.
D. Verifying the VHT functionality to handle the call volume incurred by a single VoIP phone call.
Answer: B
A. All ports on theEthernet switch will be supporting Class 3 PoE powered devices.
B. Some APs are connected to a PoE switch and are also receiving power from an AC outlet.
C. The Ethernet switch uplink ports are not connected to an 802.3-2012, Clause 33-compliant core or distribution Ethernet switch.
D. A gigabit Ethernet switch port supporting an 802.11a/g AP auto-negotiates to 100 Mbps.
Answer: A
You are onsite with a client to perform a post-deployment site survey. When verifying a multiple channel VoWiFi deployment using a VoWiFi handset, which aspect is most important?
A. Performingprotocol analysis with a single wireless adapter that is scanning all channels in use
B. Testing a constant conversation orhandset tone while roaming from area to area, or performing an active survey
C. Configuring DSCP-to-802.11e QoS maps on the handset for each access category.
D. Verifying the VHT functionality to handle the call volume incurred by a single VoIP phone call.
Answer: B
Thursday, 1 March 2018
CWNP CWNA-106 Question Answer
You are selecting antennas for a WLAN operating in the 5 GHz frequency band. What specifications should be evaluated for an antenna before it is implemented in this WLAN system?
A. 802.11ad compatibility
B. TPC support
C. Impedance in Ohms
D. Return Loss Rating
Answer: C
When a client moves to a new BSS within an ESS, whatstep is a part of the 802.11 reassociation process?
A. The client station transmits a Reassociation Request frame to its currentaccess point.
B. The current access point informs the IP gateway of the reassociation.
C. The current access point triggers theclient’s reassociation service.
D. The new access point transmits a Reassociation Response to the client station with a status value.
Answer: D
A. 802.11ad compatibility
B. TPC support
C. Impedance in Ohms
D. Return Loss Rating
Answer: C
When a client moves to a new BSS within an ESS, whatstep is a part of the 802.11 reassociation process?
A. The client station transmits a Reassociation Request frame to its currentaccess point.
B. The current access point informs the IP gateway of the reassociation.
C. The current access point triggers theclient’s reassociation service.
D. The new access point transmits a Reassociation Response to the client station with a status value.
Answer: D
Subscribe to:
Posts (Atom)